![]() Skipped accessing those hard disks that return the ID Sector from another disk.įixed Nuvoton NCT6791D and NCT6792D sixth fan readings.Īdded support for alternate registers of NCT6793D. You can set, say, 60 as the maximum value.Ĭonsider that when the WARNING temperature is reached, the program sets the fan speed to 100, whatever maximum speed you selected.Īdded full support for Intel Sunrise Point (Z170) SMBus.Īdded full support for Giantec GT34TS04 and GT34TS02.Īdded support for Fintek F71878A/F71868A at non standard addresses.Įnabled SMBus on Intel 6 Series / C20x, if needed.įixed SCSI_PASS_THROUGH access on some systems. It is suggested to use 100 as the maximum value, unless you hear a lot of noise from it, in which case you might reduce the maximum speed to 95 or 90. When you hear no noise from the fan then you can set that value as the minimum fan speed for that fan. ![]() When choosing parameters for the minimum and maximum fan speed, try to set them by hand (disable all the VARIATE FANs checkboxes) and listen to the noise. SpeedFan monitor temperatures from several sources.īy properly configuring SpeedFan, you can let it change fan speeds based on system temperatures. SpeedFan works fine with Windows 9x, ME, NT, 2000, 2003, XP, Vista, Windows 7, 2008, Windows 8, Windows 10 and Windows Server 2012. SpeedFan can even change the FSB on some hardware (but this should be considered a bonus feature). It can access digital temperature sensors and can change fan speeds accordingly, thus reducing noise. info and show hard disk temperatures and supports SCSI disks too. SpeedFan is a program that monitors voltages, fan speeds and temperatures in computers with hardware monitor chips.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |